Collection: Under $50

A staple for every Jiu Jitsu practitioner - a clean and simple belt, perfect for everyday training and competitions. This belt is made with a durable 8 stitch cotton twill blend. The silicone label has an Icon embroidery and is designed to withstand the countless hours of blood, sweat and tears we put into our belts. Features: 8 Stitch - 8 oz Cotton twill blend Woven label Competition legal Available in A0 - A5 White - Brown Belt have a black bar Black belt has a red bar Approximate Length:A0 — 96 inchesA1 — 105 inchesA2 — 113 inches A3 — 122 inchesA4 — 132 inches A5 — 141 inchesA6 — 151 inches *Approximate length may vary slightly due to deviations in manufacturing*

The all new Hyperfly Comp Belt. Ultra light and soft, ready to go out of the bag. We made this belt as slim and light as possible, 260gsm pearl weave ecru-lite. Black belts come with either a red, or white bar. Features: 350 gsm pearl weave Only available in Blue - Black  Available in A0 - A6 Approximate Length and Weight:A0 — 96 inches / 8oz A1 — 105 inches / 8.52oz A2 — 113 inches / 9.26oz A3 — 122 inches / 9.89oz A4 — 132 inches / 10.7oz A5 — 141 inches / 11.79ozA6 — 151 inches / 12.55oz *Approximate length may vary slightly due to deviations in manufacturing*
YOU CAN'T TEACH HEART.

Effortlessly blend convenience and style with this cross-body bag, your perfect companion for travel and social outings. Featuring a spacious main compartment, and secret back pocket, your valuables are sure to stay secured. Black, Sage, and Slate Blue are now available with a new blackout strap. Features: 1 large compartment and 3 smaller inside pockets Hidden back zipper pocket 100% nylon body 100% polyester mesh pockets Adjustable clip-on belt strap Water-resistant material You Can't Teach Heart silicone patch Spot clean only, do not bleach or machine wash Size: 8.5in x 5.5in

The YCTH belt, reimagined. Lighter material, fresh colorways, and new labels — everything updated but the message. 8-stitch 350gsm pearl weave "You Can't Teach Heart" print across the center line Brand new labels Sizes A0–A6 Approximate Length:A0 — 96 inches A1 — 105 inches A2 — 113 inches  A3 — 122 inches A4 — 132 inches  A5 — 141 inchesA6 — 151 inches Approximate length may vary slightly due to deviations in manufacturing. Each belt is printed individually and may present slight imperfections. Picture is more vibrant than actual belt due to stage lighting. Print may fade over time, regardless of maintenance. Not legal for IBJJF or UAEJJF competitions.YOU CAN'T TEACH HEART.

Your grip is a weapon — train it like one. Grip-Tech is built for off-the-mat conditioning, engineered to build crushing grip strength and toughen your hands for whatever's coming. Sleeve attachment with two sides: 450gsm & 750gsm Lapel attachment Includes mesh bag 200 lb weight limit Purchasers, users, and participants assume all risk of injury. Hyperfly cannot and will not be responsible for the misuse or unauthorized and improper use of products sold through this website, Hyperfly's catalog, or otherwise.

Set the tone before anyone even walks in. This bold mat makes it clear what kind of house — or gym — this is. Nylon with digital logo print Made from natural and recycled rubber Anti-slip bottom keeps the mat in place and prevents mildew buildup Sewn edge border Walk-off carpet style 24" x 36" / 3.1 lbs Machine made

The FlyDry Fanny is an incredibly practical way of carrying your personal belongings. Its compact design makes it the perfect choice when traveling light.   The welded seams lock water and all elements out while being highly resistant to UV light, cold temperatures, and tearing. Features: Welded Zippers.  1 large compartment and 2 smaller inside pockets. Hidden back zipper pocket. 2.5 liters Adjustable belt strap. Water-resistant material.

Your hands do the talking — make sure they're protected. Ultra-soft, perfectly stretchy, and built to wrap like a second skin. Throw them on, throw down, repeat. 180 inches Velcro closure Available in 3 colors Perfect for Muay Thai, MMA, and Mixed Martial Arts

Never bring sand to the beach — stay dry, stay fly. Lightweight, bold, and built for sun-soaked days by the shore. Fully sublimated brushed cotton Soft feel 60" x 30" Available in two designs

Deck out your jacket, hat, or bag with this collector-worthy trio. The set includes You Can't Teach Heart, Choke Me, and the Hyperfly logo — all finished in gold that actually lasts. Metal with decorative enamel and shining finish Set of 3 pins Butterfly clutch backing

Join our Grappling Club, where mastery meets the mat in the dynamic world of Jiu Jitsu. Perfect your skills, learn from the best, and be part of a community dedicated to excellence in every throw and hold. This low-profile, five-panel cap features a lightweight, quick-dry 100% recycled nylon body with contrasting panels. Complete with an adjustable plastic fastener and elastic straps for a personalized fit. Details: 100% Recycled Nylon High density silicone transfer text on front Adjustable fastener in back Mid profile cap  

Carry the words that carry you. One side says it all — the other says even more. Built tough enough for the grocery run, the gym, and everywhere in between. Heavyweight 25 oz. coated cotton canvas YCTH. print on front, full Mantra print on back Sturdy construction and sewing Easy maintenance 21" x 13" YOU CAN'T TEACH HEART. 

The cap that says everything without saying a word. Clean, low-key, and built for all-day wear — because heart doesn't take a day off. Lightweight 100% cotton Low profile five-panel construction with curved peak Adjustable fastener with metal clasp Tonal under-peak lining

FINAL SALE // NO RETURNS Crafted by Damage Control—a brand in high-end, performance-driven mouthguards. Designed for athletes who demand superior protection without compromising on comfort, this extreme-impact mouthguard combines cutting-edge technology with the Hyperfly aesthetic. Comes with a $15K dental warranty through Damage Control. Engineered for all combat sports, the Hyperfly Mouthguard features: Superior Protection: High-quality materials and a built-in shock pad for unmatched impact absorption. Optimal Fit: A design that molds perfectly to your teeth, ensuring a snug, secure fit for maximum comfort and safety. Durability: Crafted to last through the toughest training sessions and matches. Convenience: Includes a sleek carrying case for easy storage and portability. How to boil & fit your mouth guard: Prepare the materials you need, including the mouthguard, boiling water, some tongs, and ice water if required (some models do, some don’t). Also have a towel on hand. Boil: Using a small pot and just enough water to fully submerge the mouthguard, boil it using the instructions that are present on its packaging. These instructions will include the amount of time it should be boiled for and any other important details. In rare cases where there are no directions, plan to heat the mouthguard until you can mold it somewhat, but not to the degree where it’s melting. Remove: Using the tongs, remove the mouthguard from the pot – try not to squeeze too hard and risk deforming the mouthguard while you do this. As fast as you can, place the mouthguard on the towel to get any remaining water off it. Place in mouth: After just enough cooling time that the mouthguard isn’t too hot to put in the mouth, place it in with the guard against the upper front teeth. Then use your thumbs to push it back against the molars. From here, bite down against the bottom teeth and suck in the mouthguard so it also touches the top teeth. Leave it here for about 15 or 20 seconds, pressing your tongue against the roof of your mouth to get a tight fit. Cooling: Cool the mouthguard in cold water or just by leaving it out to air dry (some mouthguards should not be placed in cool water, and will say as much on their directions). After a few minutes of cooling, test the fit – if it isn’t ideal, you can start over and remold it.

Designed for a standout look, this high-profile snapback cap is crafted from mid-weight 100% cotton. It features a structured front, curved peak, plastic snapback closure, and tonal under-peak lining. Details: High Profile Mid weight, 100% cotton Snapback cap, curved peak  

FINAL SALE // NO RETURNS Crafted by Damage Control—a brand in high-end, performance-driven mouthguards. Designed for athletes who demand superior protection without compromising on comfort, this extreme-impact mouthguard combines cutting-edge technology with the Hyperfly aesthetic. Comes with a $15K dental warranty through Damage Control. Engineered for all combat sports, the Hyperfly Mouthguard features: Superior Protection: High-quality materials and a built-in shock pad for unmatched impact absorption. Optimal Fit: A design that molds perfectly to your teeth, ensuring a snug, secure fit for maximum comfort and safety. Durability: Crafted to last through the toughest training sessions and matches. Convenience: Includes a sleek carrying case for easy storage and portability. How to boil & fit your mouth guard: Prepare the materials you need, including the mouthguard, boiling water, some tongs, and ice water if required (some models do, some don’t). Also have a towel on hand. Boil: Using a small pot and just enough water to fully submerge the mouthguard, boil it using the instructions that are present on its packaging. These instructions will include the amount of time it should be boiled for and any other important details. In rare cases where there are no directions, plan to heat the mouthguard until you can mold it somewhat, but not to the degree where it’s melting. Remove: Using the tongs, remove the mouthguard from the pot – try not to squeeze too hard and risk deforming the mouthguard while you do this. As fast as you can, place the mouthguard on the towel to get any remaining water off it. Place in mouth: After just enough cooling time that the mouthguard isn’t too hot to put in the mouth, place it in with the guard against the upper front teeth. Then use your thumbs to push it back against the molars. From here, bite down against the bottom teeth and suck in the mouthguard so it also touches the top teeth. Leave it here for about 15 or 20 seconds, pressing your tongue against the roof of your mouth to get a tight fit. Cooling: Cool the mouthguard in cold water or just by leaving it out to air dry (some mouthguards should not be placed in cool water, and will say as much on their directions). After a few minutes of cooling, test the fit – if it isn’t ideal, you can start over and remold it.

Represent the YCTH Mantra with these high-quality die-cut stickers. Perfect to put on your bottle, laptop, phone, or car. Buy 3 or more YCTH stickers of any color and get 20% off. Details: Weather sealed Vinyl 3 inches x 3.5 inches

FINAL SALE // NO RETURNS Crafted by Damage Control—a brand in high-end, performance-driven mouthguards. Designed for athletes who demand superior protection without compromising on comfort, this extreme-impact mouthguard combines cutting-edge technology with the Hyperfly aesthetic. Comes with a $15K dental warranty through Damage Control. Engineered for all combat sports, the Hyperfly Mouthguard features: Superior Protection: High-quality materials and a built-in shock pad for unmatched impact absorption. Optimal Fit: A design that molds perfectly to your teeth, ensuring a snug, secure fit for maximum comfort and safety. Durability: Crafted to last through the toughest training sessions and matches. Convenience: Includes a sleek carrying case for easy storage and portability. How to boil & fit your mouth guard: Prepare the materials you need, including the mouthguard, boiling water, some tongs, and ice water if required (some models do, some don’t). Also have a towel on hand. Boil: Using a small pot and just enough water to fully submerge the mouthguard, boil it using the instructions that are present on its packaging. These instructions will include the amount of time it should be boiled for and any other important details. In rare cases where there are no directions, plan to heat the mouthguard until you can mold it somewhat, but not to the degree where it’s melting. Remove: Using the tongs, remove the mouthguard from the pot – try not to squeeze too hard and risk deforming the mouthguard while you do this. As fast as you can, place the mouthguard on the towel to get any remaining water off it. Place in mouth: After just enough cooling time that the mouthguard isn’t too hot to put in the mouth, place it in with the guard against the upper front teeth. Then use your thumbs to push it back against the molars. From here, bite down against the bottom teeth and suck in the mouthguard so it also touches the top teeth. Leave it here for about 15 or 20 seconds, pressing your tongue against the roof of your mouth to get a tight fit. Cooling: Cool the mouthguard in cold water or just by leaving it out to air dry (some mouthguards should not be placed in cool water, and will say as much on their directions). After a few minutes of cooling, test the fit – if it isn’t ideal, you can start over and remold it.

Represent the YCTH Mantra with these high-quality die-cut stickers. Perfect to put on your bottle, laptop, phone, or car. Buy 3 or more YCTH stickers of any color and get 20% off. Details: Weather sealed Vinyl 3 inches x 3.5 inches

   Join our Grappling Club, where mastery meets the mat in the dynamic world of Jiu Jitsu. Perfect your skills, learn from the best, and be part of a community dedicated to excellence in every throw and hold. Details: Heavy weight 9.4 oz, 100% cotton canvas Reinforced Shoulder Straps One size: 46cm x 37cm