Collection: Under $50

Un incontournable pour tout pratiquant de Jiu Jitsu : une ceinture propre et simple, parfaite pour l'entraînement et les compétitions quotidiennes. Cette ceinture est fabriquée dans un sergé de coton mélangé durable à 8 points. L'étiquette en silicone est ornée d'une broderie Icon et est conçue pour résister aux innombrables heures de sang, de sueur et de larmes que nous mettons dans nos ceintures. Caractéristiques : 8 Stitch - Mélange de sergé de coton Étiquette en silicone avec broderie Icon Concurrence juridique Disponible en A0 - A5 Blanc - La ceinture marron a une barre noire La ceinture noire a une barre rouge Longueur approximative : A0 — 96 pouces A1 — 105 pouces A2 — 113 pouces A3 — 122 pouces A4 — 132 pouces A5 — 141 pouces A6 — 151 pouces *La longueur approximative peut varier légèrement en raison des écarts de fabrication*

La toute nouvelle ceinture Hyperfly Comp. Ultra léger et doux, prêt à sortir du sac. Nous avons rendu cette ceinture aussi fine et légère que possible, 260 g/m² en tissage perlé écru-lite. Les ceintures noires sont accompagnées d'une barre rouge ou blanche. Caractéristiques : Uniquement disponible en Bleu - Noir Disponible en A0 - A6 Longueur et poids approximatifs : A0 — 96 pouces / 8 oz A1 — 105 pouces / 8,52 oz A2 — 113 pouces / 9,26 oz A3 — 122 pouces / 9,89 onces A4 — 132 pouces / 10,7 onces A5 — 141 pouces / 11,79 onces A6 — 151 pouces / 12,55 onces *La longueur approximative peut varier légèrement en raison des écarts de fabrication* VOUS NE POUVEZ PAS ENSEIGNER LE COEUR.

Mélangez sans effort commodité et style avec ce sac à bandoulière, votre compagnon idéal pour les voyages et les sorties sociales. Doté d'un compartiment principal spacieux et d'une poche arrière secrète, vos objets de valeur resteront en sécurité. Black, Sage et Slate Blue sont désormais disponibles avec un nouveau bracelet occultant. Caractéristiques: 1 grand compartiment et 3 petites poches intérieures Poche arrière zippée dissimulée Corps 100% nylon Poches en filet 100 % polyester Sangle de ceinture réglable à clipser Matériau résistant à l'eau Vous ne pouvez pas enseigner le patch en silicone Heart Nettoyer les taches uniquement, ne pas blanchir ni laver en machine Taille: 8,5 pouces x 5,5 pouces

The YCTH belt, reimagined. Lighter material, fresh colorways, and new labels — everything updated but the message. 8-stitch 350gsm pearl weave "You Can't Teach Heart" print across the center line Brand new labels Sizes A0–A6 Approximate Length:A0 — 96 inches A1 — 105 inches A2 — 113 inches  A3 — 122 inches A4 — 132 inches  A5 — 141 inchesA6 — 151 inches Approximate length may vary slightly due to deviations in manufacturing. Each belt is printed individually and may present slight imperfections. Picture is more vibrant than actual belt due to stage lighting. Print may fade over time, regardless of maintenance. Not legal for IBJJF or UAEJJF competitions.YOU CAN'T TEACH HEART.

Grip Tech par HYPERFLY est une innovation hors du tapis. C'est l'outil parfait pour augmenter votre force de préhension et conditionner vos mains. Détails: Prouesse de fixation des manches. deux faces, 450 g/m² et 750 g/m² Attache revers Comprend un sac en filet Limite de poids de 200 livres Les acheteurs, utilisateurs et participants assument tous les risques de blessures. HYPERFLY ne peut pas et ne sera pas responsable de la mauvaise utilisation ou de l'utilisation non autorisée et inappropriée des produits vendus via ce site Web, le catalogue HYPERFLY ou autrement.

Ce YCTH. Mat rendra votre voisin jaloux. Conçu pour être utilisé dans les entrées, les portes d'entrée et arrière de la maison, les salles de repos, les cuisines, les zones de vente, les fontaines d'eau et bien sûr votre salle de sport. Oui, même s’il est beau et fabriqué avec des matériaux de haute qualité, il reste extrêmement durable. Fabriqué à partir de caoutchouc naturel et recyclé. Nylon avec logo imprimé numérique Fabriqué à la machine à l'étranger Le fond antidérapant maintient le tapis en place et élimine l'accumulation de moisissure. Bordure cousue Style de tapis de passage Taille 24x36 pouces Poids 3,1 livres

Le FlyDry Fanny est un moyen incroyablement pratique de transporter vos effets personnels. Son design compact en fait le choix idéal pour voyager léger. Les coutures soudées bloquent l'eau et tous les éléments tout en étant très résistantes aux rayons UV, aux températures froides et aux déchirures. Caractéristiques: Fermetures éclair soudées. 1 grand compartiment et 2 petites poches intérieures. Poche arrière zippée dissimulée. 2,5 litres Sangle de ceinture réglable. Matériau résistant à l'eau.

Les bandages pour les mains Hyperfly sont ultra doux avec la quantité parfaite d'étirement. Ces bandes s'adaptent à vos mains et poignets avec une précision flexible et protègent vos mains pendant l'entraînement. Parfait pour le Muay Thai et le MMA. Détails: Disponible en 3 couleurs fermeture velcro

Never bring sand to the beach — stay dry, stay fly. Lightweight, bold, and built for sun-soaked days by the shore. Fully sublimated brushed cotton Soft feel 60" x 30" Available in two designs

Décorez votre veste, votre chapeau ou votre sac avec cet ensemble doré d'épingles en émail. Fabriqué à partir de matériaux haut de gamme et d'une finition brillante qui dure. Détails: - Épingle en métal avec émail décoratif - L'ensemble comprend 3 broches -Support d'embrayage papillon

Emportez le mantra complet « You Can't Teach Heart » avec vous partout où vous allez. Idéal pour faire du shopping, explorer et même s'entraîner ! Caractéristiques : Poids lourd 25 onces. toile de coton enduite. 21x13 pouces YCTH. & Impression mantra. Construction et couture robustes. Entretien facile. VOUS NE POUVEZ PAS ENSEIGNER LE COEUR.

The cap that says everything without saying a word. Clean, low-key, and built for all-day wear — because heart doesn't take a day off. Lightweight 100% cotton Low profile five-panel construction with curved peak Adjustable fastener with metal clasp Tonal under-peak lining

FINAL SALE // NO RETURNS Crafted by Damage Control—a brand in high-end, performance-driven mouthguards. Designed for athletes who demand superior protection without compromising on comfort, this extreme-impact mouthguard combines cutting-edge technology with the Hyperfly aesthetic. Comes with a $15K dental warranty through Damage Control. Engineered for all combat sports, the Hyperfly Mouthguard features: Superior Protection: High-quality materials and a built-in shock pad for unmatched impact absorption. Optimal Fit: A design that molds perfectly to your teeth, ensuring a snug, secure fit for maximum comfort and safety. Durability: Crafted to last through the toughest training sessions and matches. Convenience: Includes a sleek carrying case for easy storage and portability. How to boil & fit your mouth guard: Prepare the materials you need, including the mouthguard, boiling water, some tongs, and ice water if required (some models do, some don’t). Also have a towel on hand. Boil: Using a small pot and just enough water to fully submerge the mouthguard, boil it using the instructions that are present on its packaging. These instructions will include the amount of time it should be boiled for and any other important details. In rare cases where there are no directions, plan to heat the mouthguard until you can mold it somewhat, but not to the degree where it’s melting. Remove: Using the tongs, remove the mouthguard from the pot – try not to squeeze too hard and risk deforming the mouthguard while you do this. As fast as you can, place the mouthguard on the towel to get any remaining water off it. Place in mouth: After just enough cooling time that the mouthguard isn’t too hot to put in the mouth, place it in with the guard against the upper front teeth. Then use your thumbs to push it back against the molars. From here, bite down against the bottom teeth and suck in the mouthguard so it also touches the top teeth. Leave it here for about 15 or 20 seconds, pressing your tongue against the roof of your mouth to get a tight fit. Cooling: Cool the mouthguard in cold water or just by leaving it out to air dry (some mouthguards should not be placed in cool water, and will say as much on their directions). After a few minutes of cooling, test the fit – if it isn’t ideal, you can start over and remold it.

Designed for a standout look, this high-profile snapback cap is crafted from mid-weight 100% cotton. It features a structured front, curved peak, plastic snapback closure, and tonal under-peak lining. Details: High Profile Mid weight, 100% cotton Snapback cap, curved peak  

FINAL SALE // NO RETURNS Crafted by Damage Control—a brand in high-end, performance-driven mouthguards. Designed for athletes who demand superior protection without compromising on comfort, this extreme-impact mouthguard combines cutting-edge technology with the Hyperfly aesthetic. Comes with a $15K dental warranty through Damage Control. Engineered for all combat sports, the Hyperfly Mouthguard features: Superior Protection: High-quality materials and a built-in shock pad for unmatched impact absorption. Optimal Fit: A design that molds perfectly to your teeth, ensuring a snug, secure fit for maximum comfort and safety. Durability: Crafted to last through the toughest training sessions and matches. Convenience: Includes a sleek carrying case for easy storage and portability. How to boil & fit your mouth guard: Prepare the materials you need, including the mouthguard, boiling water, some tongs, and ice water if required (some models do, some don’t). Also have a towel on hand. Boil: Using a small pot and just enough water to fully submerge the mouthguard, boil it using the instructions that are present on its packaging. These instructions will include the amount of time it should be boiled for and any other important details. In rare cases where there are no directions, plan to heat the mouthguard until you can mold it somewhat, but not to the degree where it’s melting. Remove: Using the tongs, remove the mouthguard from the pot – try not to squeeze too hard and risk deforming the mouthguard while you do this. As fast as you can, place the mouthguard on the towel to get any remaining water off it. Place in mouth: After just enough cooling time that the mouthguard isn’t too hot to put in the mouth, place it in with the guard against the upper front teeth. Then use your thumbs to push it back against the molars. From here, bite down against the bottom teeth and suck in the mouthguard so it also touches the top teeth. Leave it here for about 15 or 20 seconds, pressing your tongue against the roof of your mouth to get a tight fit. Cooling: Cool the mouthguard in cold water or just by leaving it out to air dry (some mouthguards should not be placed in cool water, and will say as much on their directions). After a few minutes of cooling, test the fit – if it isn’t ideal, you can start over and remold it.

Represent the YCTH Mantra with these high-quality die-cut stickers. Perfect to put on your bottle, laptop, phone, or car. Buy 3 or more YCTH stickers of any color and get 20% off. Details: Weather sealed Vinyl 3 inches x 3.5 inches

FINAL SALE // NO RETURNS Crafted by Damage Control—a brand in high-end, performance-driven mouthguards. Designed for athletes who demand superior protection without compromising on comfort, this extreme-impact mouthguard combines cutting-edge technology with the Hyperfly aesthetic. Comes with a $15K dental warranty through Damage Control. Engineered for all combat sports, the Hyperfly Mouthguard features: Superior Protection: High-quality materials and a built-in shock pad for unmatched impact absorption. Optimal Fit: A design that molds perfectly to your teeth, ensuring a snug, secure fit for maximum comfort and safety. Durability: Crafted to last through the toughest training sessions and matches. Convenience: Includes a sleek carrying case for easy storage and portability. How to boil & fit your mouth guard: Prepare the materials you need, including the mouthguard, boiling water, some tongs, and ice water if required (some models do, some don’t). Also have a towel on hand. Boil: Using a small pot and just enough water to fully submerge the mouthguard, boil it using the instructions that are present on its packaging. These instructions will include the amount of time it should be boiled for and any other important details. In rare cases where there are no directions, plan to heat the mouthguard until you can mold it somewhat, but not to the degree where it’s melting. Remove: Using the tongs, remove the mouthguard from the pot – try not to squeeze too hard and risk deforming the mouthguard while you do this. As fast as you can, place the mouthguard on the towel to get any remaining water off it. Place in mouth: After just enough cooling time that the mouthguard isn’t too hot to put in the mouth, place it in with the guard against the upper front teeth. Then use your thumbs to push it back against the molars. From here, bite down against the bottom teeth and suck in the mouthguard so it also touches the top teeth. Leave it here for about 15 or 20 seconds, pressing your tongue against the roof of your mouth to get a tight fit. Cooling: Cool the mouthguard in cold water or just by leaving it out to air dry (some mouthguards should not be placed in cool water, and will say as much on their directions). After a few minutes of cooling, test the fit – if it isn’t ideal, you can start over and remold it.

Represent the YCTH Mantra with these high-quality die-cut stickers. Perfect to put on your bottle, laptop, phone, or car. Buy 3 or more YCTH stickers of any color and get 20% off. Details: Weather sealed Vinyl 3 inches x 3.5 inches

Une nouvelle version futuriste du logo Hyperfly classique. Pré-rétréci lors d'un lavage enzymatique pour un toucher plus doux que doux avec une coupe classique, c'est le type de chemise que les gens conservent pendant des années. Détails: 6,5 onces, 100 % coton biologique Sensation de main douce Pré-rétréci Fidèle à la taille Grand imprimé hyperfly déformé au dos