Um item básico para todo praticante de Jiu Jitsu - um cinto limpo e simples, perfeito para treinos e competições do dia a dia. Este cinto é feito com uma mistura de sarja de algodão durável de 8 pontos. A etiqueta de silicone tem um bordado Icon e foi projetada para resistir às inúmeras horas de sangue, suor e lágrimas que colocamos em nossos cintos.
Características :
8 pontos – mistura de sarja de algodão
Etiqueta de silicone com bordado de ícone
Concorrência legal
Disponível em A0 - A5
Branco - Faixa Marrom tem uma barra preta
Faixa preta tem barra vermelha
Comprimento Aproximado : A0 – 96 polegadas A1 – 105 polegadas A2 – 113 polegadas A3 – 122 polegadas A4 – 132 polegadas A5 – 141 polegadas A6 – 151 polegadas
*O comprimento aproximado pode variar ligeiramente devido a desvios na fabricação*
O novo cinto Hyperfly Comp. Ultraleve e macio, pronto para sair da bolsa. Tornamos este cinto o mais fino e leve possível, tecido pérola 260gsm ecru-lite.
Os faixas pretas vêm com uma barra vermelha ou branca.
Características :
Disponível apenas em Azul - Preto
Disponível em A0 - A6
Comprimento e peso aproximados : A0 – 96 polegadas/8 onças
A1 – 105 polegadas / 8,52 onças
A2 – 113 polegadas / 9,26 onças
A3 – 122 polegadas / 9,89 onças
A4 – 132 polegadas / 10,7 onças
A5 – 141 polegadas / 11,79 onças A6 – 151 polegadas / 12,55 onças
*O comprimento aproximado pode variar ligeiramente devido a desvios na fabricação* VOCÊ NÃO PODE ENSINAR O CORAÇÃO.
Combine facilmente conveniência e estilo com esta bolsa transversal, sua companheira perfeita para viagens e passeios sociais. Apresentando um compartimento principal espaçoso e um bolso traseiro secreto, seus objetos de valor certamente ficarão protegidos.
Black, Sage e Slate Blue estão agora disponíveis com uma nova pulseira blackout.
Características:
1 compartimento grande e 3 bolsos internos menores
Bolso traseiro oculto com zíper
Corpo 100% náilon
Bolsos em malha 100% poliéster
Alça de cinto ajustável
Material resistente à água
Você não pode ensinar adesivo de silicone ao coração
Limpe apenas no local, não use alvejante ou lave na máquina
Tamanho:
8,5 pol. x 5,5 pol.
The YCTH belt, reimagined. Lighter material, fresh colorways, and new labels — everything updated but the message.
8-stitch 350gsm pearl weave
"You Can't Teach Heart" print across the center line
Brand new labels
Sizes A0–A6
Approximate Length:A0 — 96 inches
A1 — 105 inches
A2 — 113 inches
A3 — 122 inches
A4 — 132 inches
A5 — 141 inchesA6 — 151 inches
Approximate length may vary slightly due to deviations in manufacturing. Each belt is printed individually and may present slight imperfections. Picture is more vibrant than actual belt due to stage lighting. Print may fade over time, regardless of maintenance. Not legal for IBJJF or UAEJJF competitions.YOU CAN'T TEACH HEART.
Grip Tech da HYPERFLY é inovação fora dos tatames. Esta é a ferramenta perfeita para aumentar a força de preensão e condicionar as mãos.
Detalhes:
Façanha de fixação de manga. dois lados, 450gsm e 750gsm
Acessório de lapela
Inclui bolsa de malha
Limite de peso de 200 libras
Compradores, usuários e participantes assumem todos os riscos de lesões. A HYPERFLY não pode e não será responsável pelo uso indevido ou não autorizado e indevido de produtos vendidos através deste site, do catálogo da HYPERFLY ou de outra forma.
Este YCTH. Mat vai deixar seu vizinho com ciúmes. Feito para uso em entradas, portas frontais e traseiras de casas, salas de descanso, cozinhas, áreas de vendas, fontes de água e, claro, sua academia. Sim, mesmo sendo bonito e feito com materiais de alta qualidade, ainda é extremamente durável.
Feito de borracha natural e reciclada.
Nylon com impressão digital do logotipo
Máquina feita no exterior
O fundo antiderrapante mantém o tapete no lugar e elimina o acúmulo de mofo.
Borda costurada
Estilo de tapete walk-off
Tamanho 24x36 polegadas
Peso 3,1 libras
A FlyDry Fanny é uma forma incrivelmente prática de transportar seus pertences pessoais. Seu design compacto o torna a escolha perfeita para viagens leves.
As costuras soldadas retêm a água e todos os elementos, ao mesmo tempo que são altamente resistentes à luz ultravioleta, baixas temperaturas e rasgos.
Características:
Zíperes soldados.
1 compartimento grande e 2 bolsos internos menores.
Bolso traseiro oculto com zíper.
2,5 litros
Alça de cinto ajustável.
Material resistente à água.
Os envoltórios de mão Hyperfly são ultramacios e com a quantidade perfeita de elasticidade. Essas bandagens se ajustam às suas mãos e pulsos com precisão flexível e protegem suas mãos durante o treinamento. Perfeito para Muay Thai e MMA.
Detalhes:
Disponível em 3 cores
Fechamento de velcro
180 polegadas
Never bring sand to the beach — stay dry, stay fly. Lightweight, bold, and built for sun-soaked days by the shore.
Fully sublimated brushed cotton
Soft feel
60" x 30"
Available in two designs
Decore sua jaqueta, chapéu ou bolsa com este conjunto dourado de alfinetes esmaltados. Feito com materiais premium e um acabamento brilhante que dura.
Detalhes:
- Pino de metal com esmalte decorativo
- Conjunto inclui 3 pinos
-Suporte de embreagem borboleta
Join our Grappling Club, where mastery meets the mat in the dynamic world of Jiu Jitsu. Perfect your skills, learn from the best, and be part of a community dedicated to excellence in every throw and hold.
This low-profile, five-panel cap features a lightweight, quick-dry 100% recycled nylon body with contrasting panels. Complete with an adjustable plastic fastener and elastic straps for a personalized fit.
Details:
100% Recycled Nylon
High density silicone transfer text on front
Adjustable fastener in back
Mid profile cap
Leve o mantra completo "Você não pode ensinar o coração" com você onde quer que vá. Ótimo para fazer compras, explorar e até treinar! Características :
Peso pesado 25 onças. lona de algodão revestida.
21x13 pol.
YCTH. & Impressão de mantra.
Construção robusta e costura.
Manutenção fácil.
VOCÊ NÃO PODE ENSINAR O CORAÇÃO.
The cap that says everything without saying a word. Clean, low-key, and built for all-day wear — because heart doesn't take a day off.
Lightweight 100% cotton
Low profile five-panel construction with curved peak
Adjustable fastener with metal clasp
Tonal under-peak lining
FINAL SALE // NO RETURNS
Crafted by Damage Control—a brand in high-end, performance-driven mouthguards. Designed for athletes who demand superior protection without compromising on comfort, this extreme-impact mouthguard combines cutting-edge technology with the Hyperfly aesthetic.
Comes with a $15K dental warranty through Damage Control.
Engineered for all combat sports, the Hyperfly Mouthguard features:
Superior Protection: High-quality materials and a built-in shock pad for unmatched impact absorption.
Optimal Fit: A design that molds perfectly to your teeth, ensuring a snug, secure fit for maximum comfort and safety.
Durability: Crafted to last through the toughest training sessions and matches.
Convenience: Includes a sleek carrying case for easy storage and portability.
How to boil & fit your mouth guard:
Prepare the materials you need, including the mouthguard, boiling water, some tongs, and ice water if required (some models do, some don’t). Also have a towel on hand.
Boil: Using a small pot and just enough water to fully submerge the mouthguard, boil it using the instructions that are present on its packaging. These instructions will include the amount of time it should be boiled for and any other important details. In rare cases where there are no directions, plan to heat the mouthguard until you can mold it somewhat, but not to the degree where it’s melting.
Remove: Using the tongs, remove the mouthguard from the pot – try not to squeeze too hard and risk deforming the mouthguard while you do this. As fast as you can, place the mouthguard on the towel to get any remaining water off it.
Place in mouth: After just enough cooling time that the mouthguard isn’t too hot to put in the mouth, place it in with the guard against the upper front teeth. Then use your thumbs to push it back against the molars. From here, bite down against the bottom teeth and suck in the mouthguard so it also touches the top teeth. Leave it here for about 15 or 20 seconds, pressing your tongue against the roof of your mouth to get a tight fit.
Cooling: Cool the mouthguard in cold water or just by leaving it out to air dry (some mouthguards should not be placed in cool water, and will say as much on their directions). After a few minutes of cooling, test the fit – if it isn’t ideal, you can start over and remold it.
Designed for a standout look, this high-profile snapback cap is crafted from mid-weight 100% cotton. It features a structured front, curved peak, plastic snapback closure, and tonal under-peak lining.
Details:
High Profile
Mid weight, 100% cotton
Snapback cap, curved peak
FINAL SALE // NO RETURNS
Crafted by Damage Control—a brand in high-end, performance-driven mouthguards. Designed for athletes who demand superior protection without compromising on comfort, this extreme-impact mouthguard combines cutting-edge technology with the Hyperfly aesthetic.
Comes with a $15K dental warranty through Damage Control.
Engineered for all combat sports, the Hyperfly Mouthguard features:
Superior Protection: High-quality materials and a built-in shock pad for unmatched impact absorption.
Optimal Fit: A design that molds perfectly to your teeth, ensuring a snug, secure fit for maximum comfort and safety.
Durability: Crafted to last through the toughest training sessions and matches.
Convenience: Includes a sleek carrying case for easy storage and portability.
How to boil & fit your mouth guard:
Prepare the materials you need, including the mouthguard, boiling water, some tongs, and ice water if required (some models do, some don’t). Also have a towel on hand.
Boil: Using a small pot and just enough water to fully submerge the mouthguard, boil it using the instructions that are present on its packaging. These instructions will include the amount of time it should be boiled for and any other important details. In rare cases where there are no directions, plan to heat the mouthguard until you can mold it somewhat, but not to the degree where it’s melting.
Remove: Using the tongs, remove the mouthguard from the pot – try not to squeeze too hard and risk deforming the mouthguard while you do this. As fast as you can, place the mouthguard on the towel to get any remaining water off it.
Place in mouth: After just enough cooling time that the mouthguard isn’t too hot to put in the mouth, place it in with the guard against the upper front teeth. Then use your thumbs to push it back against the molars. From here, bite down against the bottom teeth and suck in the mouthguard so it also touches the top teeth. Leave it here for about 15 or 20 seconds, pressing your tongue against the roof of your mouth to get a tight fit.
Cooling: Cool the mouthguard in cold water or just by leaving it out to air dry (some mouthguards should not be placed in cool water, and will say as much on their directions). After a few minutes of cooling, test the fit – if it isn’t ideal, you can start over and remold it.
Represent the YCTH Mantra with these high-quality die-cut stickers. Perfect to put on your bottle, laptop, phone, or car.
Buy 3 or more YCTH stickers of any color and get 20% off.
Details:
Weather sealed
Vinyl
3 inches x 3.5 inches
FINAL SALE // NO RETURNS
Crafted by Damage Control—a brand in high-end, performance-driven mouthguards. Designed for athletes who demand superior protection without compromising on comfort, this extreme-impact mouthguard combines cutting-edge technology with the Hyperfly aesthetic.
Comes with a $15K dental warranty through Damage Control.
Engineered for all combat sports, the Hyperfly Mouthguard features:
Superior Protection: High-quality materials and a built-in shock pad for unmatched impact absorption.
Optimal Fit: A design that molds perfectly to your teeth, ensuring a snug, secure fit for maximum comfort and safety.
Durability: Crafted to last through the toughest training sessions and matches.
Convenience: Includes a sleek carrying case for easy storage and portability.
How to boil & fit your mouth guard:
Prepare the materials you need, including the mouthguard, boiling water, some tongs, and ice water if required (some models do, some don’t). Also have a towel on hand.
Boil: Using a small pot and just enough water to fully submerge the mouthguard, boil it using the instructions that are present on its packaging. These instructions will include the amount of time it should be boiled for and any other important details. In rare cases where there are no directions, plan to heat the mouthguard until you can mold it somewhat, but not to the degree where it’s melting.
Remove: Using the tongs, remove the mouthguard from the pot – try not to squeeze too hard and risk deforming the mouthguard while you do this. As fast as you can, place the mouthguard on the towel to get any remaining water off it.
Place in mouth: After just enough cooling time that the mouthguard isn’t too hot to put in the mouth, place it in with the guard against the upper front teeth. Then use your thumbs to push it back against the molars. From here, bite down against the bottom teeth and suck in the mouthguard so it also touches the top teeth. Leave it here for about 15 or 20 seconds, pressing your tongue against the roof of your mouth to get a tight fit.
Cooling: Cool the mouthguard in cold water or just by leaving it out to air dry (some mouthguards should not be placed in cool water, and will say as much on their directions). After a few minutes of cooling, test the fit – if it isn’t ideal, you can start over and remold it.
Represent the YCTH Mantra with these high-quality die-cut stickers. Perfect to put on your bottle, laptop, phone, or car.
Buy 3 or more YCTH stickers of any color and get 20% off.
Details:
Weather sealed
Vinyl
3 inches x 3.5 inches
Uma nova versão futurística do clássico logotipo Hyperfly.
Pré-encolhida em uma lavagem enzimática para uma sensação mais macia do que macia com um ajuste clássico, este é o tipo de camisa que as pessoas guardam por anos.
Detalhes:
6,5 onças, 100% algodão orgânico
Sensação suave da mão
Pré encolhido
Verdadeira dimensão
Impressão hiperfly grande e deformada nas costas
